T-Bolt Pipe Clamp with Rubber
A heavy-duty T-bolt clamp with EPDM rubber lining, designed to combine strong mechanical clamping with hose protection and vibration isolation for vehicle, industrial and infrastructure connections.
Heavy-Duty Clamping Without Direct Metal-to-Hose Contact
The DISLAB PRECISION T-Bolt Pipe Clamp with Rubber uses a reinforced T-bolt fastening structure together with an EPDM rubber lining positioned between the metal band and the hose or pipe surface.
The T-bolt supplies the mechanical tightening force. The 19 mm wide band distributes that force around the circumference of the connection, while the rubber layer separates the metal clamp from the hose surface.
This combination is useful when a connection requires more than simple retention. It provides a practical way to secure the hose while reducing direct surface contact, absorbing part of the vibration transmitted through the joint and protecting the clamped component from abrasion or marking.
- High-strength T-bolt fastening structure
- EPDM rubber lining between band and hose
- 19 mm wide clamping band
- M6 bolt configuration
Why Add Rubber Lining to a T-Bolt Clamp?
A conventional metal clamp can provide strong retention, but some installations also need surface protection and vibration control. Adding an EPDM lining changes how the clamp contacts the hose and helps address several common installation problems.
Hose Surface Damage
The rubber lining separates the steel band from the hose surface, helping reduce direct rubbing, marking and localized metal contact during installation and service.
Vibration Transfer
Vehicle and machinery systems can transmit continuous vibration into hose and pipe connections. The resilient rubber layer provides cushioning between the clamp and the clamped component.
Movement at the Joint
Where a hose experiences small amounts of movement during operation, the rubber interface provides a more forgiving contact surface than a bare metal band.
Need for Strong Retention
Rubber protection does not replace the mechanical clamp. The T-bolt structure continues to provide the main fastening force required to secure the connection.
A Metal Clamp and Rubber Cushion Working Together
The clamp uses a T-bolt, T-joint and bridge structure to transfer tightening force around the band. Unlike an unlined T-bolt clamp, this version includes EPDM rubber along the internal contact surface.
Each part has a different job: the metal structure provides retention, the band distributes force, and the rubber lining provides the protective interface against the hose or pipe.
Why EPDM?
The supplied product specification identifies the liner material as EPDM. In this clamp design, its primary role is to provide a resilient contact layer between the metal band and the component being secured.
T-Bolt Pipe Clamp with Rubber Specifications
The product uses a 19 mm band with multiple band thickness options, an M6 fastening bolt and EPDM rubber lining. W2, W4 and W5 material configurations provide different stainless steel content for different purchasing requirements.
Material Configurations
| Grade | Band | Bolt | T-Joint | Bridge |
|---|---|---|---|---|
| W2 | SS200 / SS300 Series | Galvanized Steel | SS200 / SS300 Series | SS200 / SS300 Series |
| W4 | SS200 / SS300 Series | SS200 / SS300 Series | SS200 / SS300 Series | SS200 / SS300 Series |
| W5 | SS316 | SS316 | SS316 | SS316 |
Listed Clamp Diameter Ranges
Wide-Band T-Bolt Structure with Continuous Rubber Protection
The clamp is designed so that the rubber lining follows the inner circumference of the metal band. This allows the liner to remain between the clamp and the hose across the primary contact area while the external T-bolt assembly provides tightening force.
Where Rubber-Lined T-Bolt Clamps Are Used
This clamp is intended for installations that need secure mechanical retention together with a protective interface between the clamp and the hose or pipe.
Suitable for compatible hose and pipe connections in commercial vehicles where vibration and repeated movement make clamp stability and surface protection important.
Can be used on appropriate vehicle hose connections where a wide-band T-bolt clamp and rubber-lined contact surface are required.
Useful for machinery and industrial hose connections where the component needs to be firmly retained without direct metal-band contact against the hose surface.
Applicable to suitable pipe and hose fastening points where mechanical security, vibration cushioning and protected contact surfaces are required.
When Is a Rubber-Lined Clamp Better Than an Unlined T-Bolt Clamp?
When Surface Protection Matters
Choose the lined version when direct steel-to-hose contact is undesirable or when the outer surface of the hose needs additional protection from abrasion.
When Equipment Vibrates
A resilient liner is useful where vibration reaches the hose connection and a cushioning layer between the metal clamp and hose is beneficial.
When Strong Clamping Is Still Required
The rubber-lined design retains the T-bolt fastening mechanism, making it suitable where buyers need both protective contact and robust mechanical tightening.
When Material Selection Matters
W2, W4 and W5 configurations allow the metallic components to be selected according to corrosion exposure and project requirements.
Information to Confirm Before Ordering
A clamp is easier to specify correctly when the supplier receives the actual installation information rather than only a nominal hose description.
Clamping Diameter
Provide the measured outside diameter of the hose or pipe at the location where the clamp will be installed.
Material Grade
Specify W2, W4 or W5 according to the required metallic component configuration and service environment.
Band Thickness
The product information lists 0.6 mm, 0.8 mm and 1.0 mm options. Confirm the required version with your purchasing specification.
Quantity & Application
Providing order quantity and a short description of the equipment or hose connection helps DISLAB PRECISION confirm the appropriate configuration.
Need to Compare Other Industrial Clamp Designs?
Browse the DISLAB PRECISION Industrial Clamps Catalog to compare T-bolt clamps, spring-loaded clamps, worm-drive hose clamps, constant-tension clamps, pipe clamps and other industrial clamping products.
T-Bolt Pipe Clamp with Rubber FAQ
What is the purpose of the rubber lining inside the clamp?
The rubber lining creates a protective interface between the metal band and the hose or pipe. It helps reduce direct metal contact, surface rubbing and vibration transfer while the T-bolt structure provides the primary clamping force.
What rubber material is used?
The supplied product specification identifies the lining material as EPDM.
Is this clamp different from a standard T-bolt hose clamp?
Yes. Both versions use a T-bolt fastening structure, but this version includes an internal rubber lining. The lining is useful where hose protection, cushioning or separation from the metal band is required.
What band width does the clamp use?
The listed band width is 19 mm. Available product information also shows 0.6 mm, 0.8 mm and 1.0 mm band thickness options.
What bolt size is used?
The listed fastening bolt is M6.
What is the difference between W2, W4 and W5?
W2 uses SS200/SS300 series material for the band and T-joint with a galvanized steel bolt, while W4 uses SS200/SS300 series material across the listed components. W5 uses SS316 for the listed metallic components.
What diameter ranges are available?
The listed catalog sizes begin at 35–40 mm and extend through 187–195 mm, with multiple intermediate ranges. Always confirm the actual assembled outside diameter before ordering.
Is a rubber-lined clamp automatically better than an unlined clamp?
Not necessarily. The correct design depends on the application. A rubber-lined version is particularly useful where surface protection and vibration cushioning are important. An unlined T-bolt clamp may be preferable where direct metal-band contact is acceptable and the rubber interface is unnecessary.
What should I provide when requesting a quotation?
Send the required clamp diameter, quantity, W2/W4/W5 material option, preferred band thickness and application details. Drawings, hose dimensions or installation photos can also help DISLAB PRECISION confirm the required clamp configuration.
Rubber-Lined T-Bolt Clamps for Industrial Sourcing
DISLAB PRECISION supplies T-Bolt Pipe Clamps with EPDM rubber lining and a broader range of industrial hose and pipe clamping products. For sourcing and quotation, provide your required diameter range, material configuration, band thickness, quantity and application information.
Explore Complete Clamp RangeRequest a Hose Clamp Quotation
Tell us the clamp type, installed hose outside diameter, preferred material, required quantity, application and destination country. Our team will review the details and respond with practical specification and quotation guidance.
Need to send drawings or specifications?
Email your PDF, STEP, DWG, DXF or other reference files directly to [email protected], or send them via WhatsApp.
For CAD drawings, product photos, samples or detailed specifications, submit the form first and then email the files directly to David .