One-Hole Saddle Clamp
A compact one-hole saddle clamp for securing pipes, tubing, hoses and electrical conduit where fast installation and minimal mounting space are important.
Pipe Support with Only One Mounting Point
Conventional saddle clamps often use two mounting tabs, one on each side of the pipe. That provides a symmetrical fixing arrangement, but it also requires more installation space and two fastening points.
The DISLAB PRECISION One-Hole Saddle Clamp uses a different approach. The formed metal band wraps over the pipe, hose or conduit while a single mounting tab provides the fixing point to the wall, machine frame, panel or supporting structure.
This compact layout is particularly useful where access is limited, installation space is narrow, or the installer needs a simple fixing point without mounting hardware on both sides of the line.
- Single-side mounting design
- Compact one-hole fixing structure
- Stable saddle support around the pipe
- Suitable for pipe, hose, tubing and conduit routing
Why Use a One-Hole Saddle Clamp?
The advantage is not simply using fewer fasteners. The single-side layout changes where and how the clamp can be installed, particularly when a conventional two-hole saddle does not fit comfortably around the pipe run.
Limited Mounting Space
Only one mounting tab needs access to the supporting surface, making the clamp practical for narrow spaces, corners and congested installations.
Slow Multi-Point Installation
A single mounting point reduces the number of fixing operations required for each support location and can simplify repetitive installation work.
Pipe and Conduit Movement
The curved saddle section supports the line and helps keep pipes, tubing or conduit in their intended routing position.
Unorganized Service Lines
Individual clamps provide defined support points for pipe, cable protection tube and conduit runs, helping maintain cleaner and more predictable routing.
One Fastening Point, Full Saddle Support
The product uses one mounting hole rather than a two-ear fixing arrangement. The free side curves over the pipe, while the mounting side extends into a flat tab that accepts the fixing screw or bolt.
This allows the formed metal section to support the pipe while reducing the amount of mounting surface required beside the line.
Where This Design Makes Sense
Single-side mounting is particularly useful along walls, structural frames, equipment panels and other locations where one side of the pipe is difficult to access or where installation speed is important.
One-Hole Saddle Clamp Specifications
The supplied product information lists two band widths, multiple metal thicknesses and M6 or M8 mounting-hole configurations.
Material Configurations
| Material Grade | Band Material | Typical Selection Consideration |
|---|---|---|
| W1 | Galvanized Steel | General industrial and building installations |
| W4 | SS200 / SS300 Series | Stainless steel construction for increased corrosion resistance |
| W5 | SS316 | Higher corrosion-resistance requirement |
Match the Formed Saddle to the Actual Pipe Diameter
Unlike an adjustable hose clamp, a formed saddle clamp has a defined curved profile. Selecting the correct size is therefore important for proper support and positioning.
A Compact Support Clamp for Faster Installation
Single-Side Mounting
One fixing point reduces the space required beside the pipe and makes the clamp useful in narrow or difficult-to-access installations.
Stable Saddle Support
The curved metal profile supports the line around part of its circumference and helps maintain a defined routing position.
Fast Installation
A single mounting fastener can simplify repetitive pipe and conduit installation compared with support designs requiring two fixing points.
Multiple Material Options
W1 galvanized steel, W4 stainless steel series and W5 SS316 provide choices for different operating environments.
How a Single-Hole Saddle Clamp Is Installed
Installation is straightforward, but the clamp size and mounting fastener should match the actual pipe and supporting surface.
Place the pipe, tubing or conduit in the required routing position against the supporting surface.
Place the curved section over the line so the formed profile sits naturally around the outside diameter.
Install the appropriate screw or bolt through the M6 or M8 mounting hole and tighten it to the supporting surface.
Where One-Hole Saddle Clamps Are Used
The compact mounting structure makes this clamp particularly useful for fixed pipe and conduit runs where installation access is limited or fast installation is preferred.
Used to secure compatible pipes to walls, ceilings, panels and structural frames while maintaining organized routing and defined support points.
Suitable for compatible water, oil, gas and air pipe routing in industrial facilities where fixed mechanical support is required.
Applicable to plumbing, drainage and other service-pipe support in residential, commercial and industrial buildings.
Useful for securing electrical conduit and cable-protection tubing to walls, panels and structural surfaces.
Single-Side or Two-Hole Saddle Clamp?
Both designs provide mechanical pipe support, but the mounting layout is different. The better choice depends on available space, installation method and support requirements.
One-Hole Saddle Clamp
- One mounting point
- Requires less mounting space
- Convenient for narrow installations
- Faster repetitive installation
- Useful where one side of the pipe is difficult to access
Two-Hole Saddle Clamp
- Mounting point on both sides
- Symmetrical fixing arrangement
- Requires access on both sides of the pipe
- Suitable where two-point fixing is preferred
- Uses a wider mounting footprint
What to Confirm Before Ordering
Outside Diameter
Measure the actual outside diameter of the pipe, tube or conduit so the formed saddle profile can be matched correctly.
Band Width & Thickness
The supplied information lists 14 mm and 19 mm band widths with 1.5 mm and 2.0 mm thickness options.
Mounting Hole
Confirm whether the installation requires the M6 or M8 mounting-hole configuration.
Material Environment
Select W1, W4 or W5 according to corrosion exposure, installation environment and purchasing requirements.
Compare Other Pipe and Hose Clamp Designs
Browse the DISLAB PRECISION Industrial Clamps Catalog for saddle clamps, T-bolt clamps, spiral wire clamps, worm-drive hose clamps, constant-tension clamps and other industrial pipe and hose fastening products.
One-Hole Saddle Clamp FAQ
What is a one-hole saddle clamp?
It is a formed metal pipe-support clamp with one mounting tab and one fixing hole. The curved section fits over the pipe, tube or conduit while the mounting tab secures the clamp to a wall, frame, panel or other support surface.
Is “One Side Thickened Saddle Clamp” the standard international name?
“One Side Thickened Saddle Clamp” is understandable as a supplier description, but “One-Hole Saddle Clamp” and “Single-Hole Pipe Clamp” are clearer descriptions for international industrial buyers.
What is the advantage of using only one mounting hole?
A single mounting point requires less space beside the pipe and can simplify installation where one side of the line is difficult to access. It can also reduce the number of fastening operations during repetitive installation work.
Is this clamp used to seal pipe connections?
No. This product is primarily a pipe-support and fixing clamp. It holds a pipe, tubing or conduit against a supporting surface. It is not intended to replace a pressure-sealing hose clamp at a hose-to-fitting joint.
What band widths are available?
The supplied product information lists 14 mm and 19 mm band-width options.
What material options are listed?
W1 is listed as galvanized steel, W4 as SS200/SS300 series stainless steel, and W5 as SS316.
What mounting-hole sizes are available?
The supplied product information lists M6 and M8 mounting-hole options.
Can this clamp be used for electrical conduit?
Yes. Electrical conduit fixing is one of the listed applications. The clamp size should match the outside diameter of the conduit, and the mounting hardware should be suitable for the supporting surface.
When should I choose W5 SS316?
W5 uses SS316 and is the available option for applications requiring greater corrosion resistance. Final material selection should consider moisture exposure and the actual operating environment.
How do I choose the correct clamp size?
Measure the actual outside diameter of the pipe, tube or conduit. The formed saddle should match that diameter rather than being selected only from a nominal pipe description.
What information should I send to DISLAB PRECISION for a quotation?
Provide the pipe or conduit outside diameter, required quantity, preferred W1/W4/W5 material, band width, mounting-hole requirement and application. Drawings or installation photos can also help confirm the appropriate configuration.
Compact Pipe Support Where Two Mounting Points Are Not Practical
DISLAB PRECISION supplies one-hole saddle clamps for pipe, tubing, hose and electrical conduit support in industrial, building and equipment applications. Provide the required outside diameter, material, band width, mounting-hole size and quantity for product selection and quotation.
Explore Complete Clamp RangeRequest a Hose Clamp Quotation
Tell us the clamp type, installed hose outside diameter, preferred material, required quantity, application and destination country. Our team will review the details and respond with practical specification and quotation guidance.
Need to send drawings or specifications?
Email your PDF, STEP, DWG, DXF or other reference files directly to [email protected], or send them via WhatsApp.
For CAD drawings, product photos, samples or detailed specifications, submit the form first and then email the files directly to David .
Continue Your Pipe Support Selection
Compare related mounting hardware and hose-clamp solutions to choose the right support geometry, material and fastening approach for your application.
Related Pipe Clamp Resources
Compare Compact and Multi-Point Pipe Supports
Choose between single-point, cushioned, grouped and channel-mounted supports according to space, vibration and routing requirements.