Worm Drive Quick Release Hose Clamp
A reusable wrap-around clamp designed for fast installation around hoses, ducts, pipes and cylindrical assemblies. Its quick-release housing allows the band to be opened, positioned and adjusted without sliding a closed clamp over the end of the installation.
Fast Wrap-Around Installation for Large or Preassembled Components
A conventional closed-loop hose clamp normally needs to be passed over the end of a hose or pipe before tightening. That installation method is not always practical when the line is already assembled, the component is very long, or access to the end is restricted.
The worm drive quick release hose clamp solves this installation problem with an openable housing. The stainless steel band can be released from the housing, wrapped directly around the component and re-engaged before final tightening. The worm-drive mechanism then provides controlled diameter adjustment through the perforated band.
This combination makes the clamp suitable for maintenance work, large-diameter fastening and applications that may require regular opening, repositioning or removal. It can also reduce unnecessary disassembly of nearby components during installation.
Three Functional Elements in One Adjustable Clamp
Each part of the assembly contributes to quick positioning, repeatable adjustment and secure fastening around the selected component.
Perforated Stainless Steel Band
The perforations engage with the screw mechanism, allowing the clamp diameter to be adjusted to the required installation size.
Quick-Release Housing
The housing allows the band to be opened and wrapped around an existing assembly instead of being installed only from the end.
Worm-Drive Screw Mechanism
After the band is re-engaged, the screw mechanism is used for controlled tightening and final diameter adjustment.
Designed for Efficient Installation and Repeated Adjustment
The design combines the familiar adjustment method of a worm-drive clamp with an opening mechanism for projects where installation access matters.
Quick Opening and Closing
The band can be disengaged from the housing before installation and reconnected after it has been positioned around the component.
Flexible Diameter Adjustment
The perforated band and screw mechanism make it possible to fine-tune the clamp diameter after the band has been wrapped into place.
Reusable Installation
The opening mechanism supports removal and reinstallation during maintenance, replacement or adjustment of the connected assembly.
W4 Stainless Steel Construction
The supplied product schedule identifies W4 construction with all clamp parts made from SS304 stainless steel.
A Practical Alternative When a Closed-Loop Clamp Is Difficult to Install
The quick-release structure is particularly useful when the installation environment makes end-loading or extensive disassembly inefficient.
No Access to the End of the Pipe or Hose
The clamp can be wrapped around the existing installation rather than passed over an inaccessible end.
Time-Consuming Component Disassembly
The opening band can help reduce the need to remove connected parts solely to position a closed clamp.
Frequent Maintenance or Replacement
The reusable release mechanism supports applications that require periodic inspection, removal or repositioning.
Large-Diameter or Irregular Installation Access
The wrap-around format simplifies initial positioning around larger cylindrical components and assemblies with limited working space.
Typical Uses for Worm Drive Quick Release Hose Clamps
Final clamp selection should be based on the working diameter, installation environment, band width and fastening requirements of the project.
Ventilation and Duct Connections
Suitable for fastening flexible ducting, ventilation lines and cylindrical duct components where quick wrap-around installation is useful.
Pipe and Hose Fixing
Used for positioning or fastening hoses and pipe-related assemblies, particularly where the clamp cannot be installed from the end.
Gardening and Irrigation Assemblies
An adjustable fastening option for selected outdoor, irrigation, gardening and general equipment installation projects.
Equipment, Pole and OEM Fastening
Can be used to secure suitable accessories or components to cylindrical equipment, supports and custom OEM assemblies.
W4 Quick Release Hose Clamp Size Schedule
The following information is organized from the supplied product schedule. Confirm the required working diameter and configuration before ordering.
| Product Name | Worm Drive Quick Release Hose Clamp |
|---|---|
| Material Grade | W4 — all parts in SS304 stainless steel |
| Catalog Size Range | 90–400 mm |
| Band Width | 12.7 mm or 14.2 mm |
| Band Thickness | 0.6 mm |
| Band Type | Perforated adjustable stainless steel band |
| Adjustment Method | Quick-release housing with worm-drive screw mechanism |
| Custom Supply | Other sizes, materials and packaging configurations can be discussed according to project requirements. |
Listed Catalog Sizes
Size values below are shown in millimetres according to the supplied table.
Dimensions should be reconfirmed against the required installation diameter, band configuration and application conditions before production.
Information to Prepare for a Faster Quotation
Providing clear dimensional and purchasing information helps DISLAB PRECISION confirm the appropriate clamp configuration for your project.
Working Diameter
Provide the actual outside diameter or required adjustment range of the hose, pipe, duct or cylindrical component.
Band Configuration
Confirm whether the project requires the listed 12.7 mm or 14.2 mm band-width configuration.
Application Details
Describe what will be fastened, the installation environment and whether the clamp will be opened frequently.
Quantity and Packaging
Include estimated order quantity, repeat purchasing requirements and any private-label or export packaging needs.
Download the DISLAB PRECISION Industrial Clamps Catalog
Review the broader collection of hose clamps and industrial fastening products for standard sourcing, product comparison and project selection. The PDF file size is approximately 48 MB.
Worm Drive Quick Release Hose Clamp FAQ
Practical answers for buyers comparing quick-release clamps with conventional closed-loop worm-drive designs.
How is a quick release hose clamp different from a standard worm drive clamp?
A standard worm-drive clamp is normally supplied as a closed loop and must be passed over the end of the hose or pipe. A quick-release model allows the band to be opened, wrapped around an existing component and re-engaged before final tightening.
Can this clamp be installed without disconnecting the pipe or duct?
The opening band is designed for wrap-around installation, so it can be useful when the clamp cannot be slid over the end. The surrounding assembly must still provide enough working space to position the band, reconnect the housing and operate the screw.
What does W4 mean for this product?
In the supplied product schedule, W4 indicates that all clamp parts are made from SS304 stainless steel, including the band, housing and adjustment components.
Which catalog sizes are available?
The supplied table lists sizes from 90 mm to 400 mm, including 90, 100, 125, 135, 165, 175, 180, 215, 225, 240, 260, 270, 280, 290, 300, 325, 380 and 400 mm. The required size should be reconfirmed against the actual installation diameter.
Is the quick release hose clamp reusable?
The mechanism is designed to be opened and reinstalled. Before reuse, inspect the perforated band, housing and screw mechanism for deformation, damage or excessive wear.
What information should be included in an RFQ?
Include the working diameter, preferred band width, application, operating environment, estimated quantity and packaging requirements. Drawings or installation photographs can also help clarify custom sourcing requirements.
Source Worm Drive Quick Release Hose Clamps from DISLAB PRECISION
Contact DISLAB PRECISION with your diameter, band-width preference, application, quantity and packaging requirements. Standard catalog sizes and project-specific configurations can be reviewed for industrial buyers, distributors and OEM sourcing programs.
Download the Clamp CatalogContact Us for a Quote
Tell us the clamp type, installed hose outside diameter, preferred material, required quantity, application and destination country. Our team will review the details and respond with practical specification and quotation guidance.
Need to send drawings or specifications?
Email your PDF, STEP, DWG, DXF or other reference files directly to [email protected], or send them via WhatsApp.
For CAD drawings, product photos, samples or detailed specifications, submit the form first and then email the files directly to David .