British-Type Worm-Drive Hose Clamp with Blue Housing
A British-type hose clamp with a distinctive blue-painted housing, non-perforated band and M7 screw. The compact housing geometry is designed to guide the band during adjustment, distribute clamping force around the hose connection and provide dependable fastening for industrial hose and pipe assemblies.
Compact British-Type Clamping with a Reinforced Blue Housing
The British-Type Worm-Drive Hose Clamp with Blue Housing is designed for secure hose-to-fitting and hose-to-pipe connections. Its non-perforated band wraps continuously around the hose, while the M7 screw and compact housing provide controlled diameter adjustment.
A newly designed short housing saddle helps maintain contact with the hose connection and guides the emerging band as the clamp is tightened. The design is intended to distribute clamping force more evenly while retaining the compact profile associated with British-type clamps.
DISLAB PRECISION supplies the clamp in W1 and W2 material configurations, with 9.7 mm and 11.7 mm band widths covering a broad range of industrial hose diameters.
Designed for Stable Band Guidance and Firm Clamping
The blue housing, smooth non-perforated band and compact screw assembly work together to provide practical adjustment across industrial hose connections.
Blue Painted Housing
The blue housing provides a distinctive product finish while enclosing and supporting the screw-and-band engagement area.
Non-Perforated Band
The continuous band presents a smooth inner contact surface without open perforations directly contacting the hose.
High Clamping and Break Torque
The British-type screw and housing arrangement is designed for firm tightening and dependable mechanical engagement.
Lower Idle Torque
The housing and band geometry are designed to support smooth initial adjustment before the clamp develops full contact pressure around the hose.
Blue Housing Hose Clamp from Multiple Angles
Multiple views provide a clearer reference for the blue housing profile, band overlap, screw position and overall clamping geometry.
Blue Housing, M7 Screw and Non-Perforated Band
The clamp uses a compact British-type structure in which the screw, housing and band form one adjustable fastening assembly.
Controlled Adjustment Around the Hose
Turning the M7 screw changes the clamp diameter by drawing the band through the housing. The short housing saddle supports the fastening area while the continuous band wraps around the hose connection.
Housing and Band Design Highlights
Close-up views help buyers inspect the band guidance, screw engagement and blue housing construction before selecting the required clamp range.
What Problems Does This Clamp Help Solve?
Correct clamp selection helps address common problems encountered when securing flexible hoses to rigid fittings and pipe connections.
Uneven Band Guidance
The compact housing geometry guides the emerging band during adjustment, helping the band remain aligned through the fastening mechanism.
Localized Hose Pressure
The continuous non-perforated band provides an uninterrupted contact surface around the hose rather than exposing open perforations to the hose cover.
Loose Hose Connections
Progressive screw adjustment applies circumferential clamping force around the hose and fitting to help maintain a stable mechanical connection.
Different Material Requirements
W1 and W2 configurations allow buyers to choose between an all-galvanized configuration and a stainless steel band combined with galvanized screw and housing.
British-Type Worm-Drive Hose Clamp with Blue Housing Specifications
Select the required diameter range, band size and material configuration according to the hose connection and operating environment.
General Parameters
| Parameter | Specification |
|---|---|
| Product Name | British-Type Worm-Drive Hose Clamp with Blue Housing |
| Band Type | Non-Perforated Band |
| Band Width × Thickness | 9.7 × 0.8 mm / 11.7 × 0.9 mm |
| Diameter Range | Standard listed ranges from 8–14 mm to 130–165 mm |
| Screw | M7 |
| Housing | Blue painted housing |
| Material Classes | W1 / W2 |
Material Configuration
| Material Class | Band | Screw | Housing |
|---|---|---|---|
| W1 | Galvanized Steel | Galvanized Steel | Galvanized Steel |
| W2 | SS200 / SS300 Series | Galvanized Steel | Galvanized Steel |
W1 uses galvanized carbon steel components. W2 combines a stainless steel 200/300-series band with galvanized steel screw and housing components.
Standard Size Range
| Clamping Range (mm) | Band Width (mm) | Band Thickness (mm) |
|---|---|---|
| 8–14 | 9.7 | 0.8 |
| 11–17 | 9.7 | 0.8 |
| 13–20 | 9.7 | 0.8 |
| 15–24 | 9.7 | 0.8 |
| 19–28 | 9.7 | 0.8 |
| 15–24 | 11.7 | 0.9 |
| 19–28 | 11.7 | 0.9 |
| 22–32 | 11.7 | 0.9 |
| 26–38 | 11.7 | 0.9 |
| 32–44 | 11.7 | 0.9 |
| 32–50 | 11.7 | 0.9 |
| 44–56 | 11.7 | 0.9 |
| 44–65 | 11.7 | 0.9 |
| 51–70 | 11.7 | 0.9 |
| 58–75 | 11.7 | 0.9 |
| 68–85 | 11.7 | 0.9 |
| 77–95 | 11.7 | 0.9 |
| 87–112 | 11.7 | 0.9 |
| 104–138 | 11.7 | 0.9 |
| 130–165 | 11.7 | 0.9 |
Some diameter ranges are available with more than one band width. Confirm the required band configuration when requesting a quotation. Other sizes and material requirements can be reviewed according to the project specification.
Industrial Uses for British-Type Worm-Drive Hose Clamps with Blue Housing
This clamp is used for adjustable hose fastening in machinery, fluid systems and equipment where a British-type non-perforated band configuration is required.
Machine Building
Used for hose fastening in machinery, auxiliary systems and general industrial equipment.
Chemical Industry
Suitable for compatible hose connections where the selected clamp material matches the surrounding operating conditions.
Irrigation Systems
Secures flexible hoses to irrigation fittings, pumps, valves and water-distribution connections.
Railway Equipment
Supports adjustable hose fastening in compatible railway machinery and auxiliary equipment.
Agricultural & Building Machines
Used on machinery hose connections that require serviceable mechanical fastening.
Marine Equipment
Can be considered for compatible auxiliary hose connections, with final material selection based on actual corrosion exposure.
Information to Confirm Before Ordering
Providing accurate connection dimensions and application details helps identify the correct clamp range without unnecessary trial fitting.
Measure the hose after it has been installed over the fitting rather than relying only on the nominal hose bore.
Specify the preferred band width where the required diameter is offered in more than one band configuration.
Confirm whether an all-galvanized configuration or stainless steel band with galvanized screw and housing is required.
State whether the clamp will be used indoors, outdoors, around moisture, chemicals or other potentially corrosive conditions.
Provide the required quantity and expected repeat purchasing volume for production and packaging review.
Include any labeling, packaging, drawing, sample or project-specific sourcing requirements with the RFQ.
Explore the Complete DISLAB PRECISION Clamp Range
Compare British-type, American-type, quick-release, constant-tension, V-band and other industrial hose clamp designs in the complete DISLAB PRECISION PDF catalog.
British-Type Worm-Drive Hose Clamp with Blue Housing FAQ
Practical answers for buyers comparing band sizes, materials and British-type clamp configurations.
What is different about the blue housing version?
This version uses a distinctive blue-painted compact housing with a non-perforated band and M7 screw. The housing geometry is designed to guide the emerging band and support the clamping area during adjustment.
Is the band perforated like an American-type worm drive clamp?
No. The product drawing identifies it as a non-perforated band. This provides a continuous inner band surface around the hose.
What is the difference between the 9.7 mm and 11.7 mm versions?
The smaller listed configurations use a 9.7 mm wide, 0.8 mm thick band. Most larger configurations use an 11.7 mm wide, 0.9 mm thick band. Some overlapping diameter ranges are available in both widths.
Why are 15–24 mm and 19–28 mm listed twice?
Those diameter ranges are listed with both the 9.7 × 0.8 mm band and the 11.7 × 0.9 mm band. Buyers should specify which band configuration is required.
What is the difference between W1 and W2?
W1 uses galvanized steel for the band, screw and housing. W2 uses an SS200/SS300-series stainless steel band together with galvanized steel screw and housing components.
What size information should I provide for a quotation?
Provide the installed hose outside diameter, required minimum and maximum clamping range, preferred band width, W1 or W2 material configuration, order quantity and application.
Can DISLAB PRECISION review a non-standard size?
Yes. If the standard range does not match the required connection, provide the target diameter, drawings or sample information so the requirement can be reviewed.
How should I choose between this clamp and a standard British Type Hose Clamp?
Compare the required diameter, band dimensions, housing design, material configuration and existing connection specification. For replacement applications, matching the dimensions and clamp structure of the original part is usually the most useful starting point.
Request a Hose Clamp Quotation
Tell us the clamp type, installed hose outside diameter, preferred material, required quantity, application and destination country. Our team will review the details and respond with practical specification and quotation guidance.
Need to send drawings or specifications?
Email your PDF, STEP, DWG, DXF or other reference files directly to [email protected], or send them via WhatsApp.
For CAD drawings, product photos, samples or detailed specifications, submit the form first and then email the files directly to David .